
CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.


The GREENGUARD Certification Program gives assurance that products designed for use in indoor spaces meet strict chemical emissions limits, which contribute to the creation of healthier interiors.
Signature Vanilla Glaze
Ships in 5-15 business days
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Signature Vanilla Cabinet collection creates a traditional and inviting setting to your kitchen. These cabinets are both elegant and functional! The light tone cabinets are well-crafted with a variety of features and options. If you're looking for a sleek new kitchen then these are the cabinets for you!
This finish is available in both Ready to Assemble and Pre-Assembled
Shipping Time: |
Ships in 5-15 business days |
Style: | Raised Square |
Face Frame: | 3/4" Solid Wood |
Door Frame: | 3/4 Solid Wood |
Door Center: | MDF (MDF is used to avoid cracking/warping) |
Sides: | 1/2" A-Grade plywood with wood veneer |
Top & Bottom (Wall): | 1/2" A-Grade plywood with wood veneer |
Bottom (Base): | 3/8" A-Grade plywood with wood veneer |
Back Panel: | 1/2" Picture Frame Recess Style |
Shelves: | 3/4 " A-Grade plywood with wood veneer |
Base Cabinet Shelf Depth: | 1/2 |
Drawer Box: | Solid Wood 17mm (close to 3/4") sides, Drawer bottom 1/2" plywood, Drawer length 21". Dovetail construction, Natural finish. |
Drawer Glides: | Undermount, full extension with soft closing feature |
Base Corner Supports: | Wood corner brackets with wood I-beam construction |
Overlay: | Full with Butt doors |
Hinges: | Concealed 6-way adjustable with Soft Closing Feature |
Cabinet Interior: | Matches door finish |
Center Stile: |
No center stile on cabinetry 24"W to 36"W |
Assembly Method: | Steel Clip |
Finish: | Waterborne UV Finish with Glaze |
Toe Kick: | 1/2" Plywood (sides of the toe kicks will be unfinished) |
Installation Rail: | 1/2" Plywood |
Wall Cabinet Bottoms Finished (Exterior): | Yes |
CARB Compliant: | Yes |
Door Hinges: | Hinged To The Right By Default. For Wall Cabinets The Face Frame Can Be Flipped. For Base Cabinets Unhinge The Door, Flip It, Screw Holes On The Opposite Side To Re-Hinge, And Then Fill The Original Holes (Touch Up Kit Can Be Purchased For This) |
Toe Kicks Included w/Base Cabinets: | Yes |
Sides Panels Finished: | Yes |
Installation/Design Note: |
The full-overlay door style leaves roughly a 1/4" clearance on the edge. If installed directly against a wall or deeper cabinet, the cabinet door will be able to open 90 degrees. For a full opening, a space of at least 1/4" is necessary, a larger space may be needed depending on the decorative hardware used on the cabinets. The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
Assembly instructions for all cabinets - schematic drawings






-
View All
-
Sample Door
-
30” High Wall Cabinets
-
36” High Wall Cabinets
-
42” High Wall Cabinets
-
12" Deep Small Wall Cabinets
-
24" Deep Small Wall Cabinets
-
Corner and Blind Wall Cabinets
-
Wall Cabinets With Drawers
-
Wall End Shelf Cabinets
-
Wall Angle Cabinets
-
Wall Specialty Cabinets
-
Hoods
-
Wall Cabinet Hanging Kits
Please note that all cabinet images are to show the final product, but assembly will be required.
-
View All
-
Single Door Base Cabinets
-
Double Door Base Cabinets
-
Drawer Base Cabinets
-
Corner and Blind Base Cabinets
-
Sink Base Cabinets
-
Microwave Base Cabinet
-
Transition and Angle Base Cabinets
-
Base Pull Out Spice Cabinets
-
Base Trash Cabinet Accessories
Please note that all cabinet images are to show the final product, but assembly will be required.
-
View All
-
Oven Cabinets
-
Pantry Cabinets
Please note that all cabinet images are to show the final product, but assembly will be required.
-
View All
-
Fillers and Columns
-
Fluted Fillers
-
Moldings and Toe Kick
-
Panels
-
Decorative Doors
-
Valances
-
Roll Out Trays
-
Decorative Accent Pieces
-
Mullion Glass Doors
-
Pullout Trash Cabinet Accessories
-
Lift Up Hinge and Hinge Restrictors
-
Recommended Decorative Hardware
-
Touch Up
-
Floating Shelves
-
View All
-
Vanity Sink Base Cabinets without Drawers
-
Vanity Sink Base Cabinets with Drawers
-
Vanity Drawer Base Cabinets
-
Vanity or Desk Drawer
Please note that all cabinet images are to show the final product, but assembly will be required.
-
View All
-
Filler Pull-Out Organizers
-
Base Trash Cabinet Accessories
-
Sink Base Tilt Out Trays
-
Inside Drawer Accessories
-
Inside Door Accessories
-
Inside Cabinet Accessories