CARB stands for California Air Resources Board, also known as Air Resources Board (ARB). It is a department of the California Environmental Protection Agency. It was established in 1967 with the purpose of maintaining and improving air quality, and researching causes and solutions of air pollution. CARB's mandates, such as CARB 2 compliant MDF, are strict and usually are considered the standard across the United States.
What is CARB Phase 2 Compliant?
CARB Phase 1 and Phase 2 are a part of California's Composite Wood Products Regulation (CWP Regulation), which took effect in 2009 with Phase 1. The regulation has to do with reducing formaldehyde emissions from composite wood products, hardwood plywood, particleboard and medium density fiberboard (MDF). In the 2009 rollout of the CARB's Airborne Toxic Control Measure (ATCM), formaldehyde emissions were capped at .08 parts per million (ppm). CARB Phase 2 went into effect in 2010 and has much lower formaldehyde emissions than the previous phase; set at .05 ppm. A main reason why the CARB ATCM is the strictest air quality measure is because it CAPS emissions levels. Other air quality standards are averages.
The Kitchen Cabinet Manufacturers Association Certification Program assures the specifier or user of kitchen cabinets and bath vanities that the cabinet bearing the blue and white seal complies with the rigorous standards set by the American National Standards Institute (ANSI) and sponsored by the Kitchen Cabinet Manufacturers Association (KCMA).
5 reasons why certified cabinetry a must for today's performance-conscious homeowner:
KCMA's rigorous, in-laboratory compliance program measures the integrity of your cabinetry through five tests. These tests evaluate cabinet structure, door and drawer operation, and the cabinetry finish, making certain each feature complies with the nationally recognized standards developed by KCMA. In today's competitive homebuilding industry, the KCMA cabinetry standards are well respected and serve as a best-in-class benchmark for cabinet manufacturers.
- Weight Tests: For seven days, in a laboratory environment, cabinet shelves and bottoms are loaded with 15 pounds of weight per square foot. Technicians monitor the cabinetry for signs of joint separation or other failures of the cabinets or their mounting systems. Other weight tests include gradually loading 500 pounds into mounted cabinets, simulating the stress on a heavily loaded cabinet, and dropping a three-pound steel ball onto cabinet bottoms from six inches above the surface, replicating dropped cans.
- Slide Tests: Few families will open and close cabinets as frequently - or as vigorously - as they are during KCMA certification testing. But that's the point. After the KCMA slides cabinets for 25,000 cycles, while they hold 15 pounds per square foot, you know your KCMA-certified cabinetry will keep pace with your active lifestyle.
- Swing Tests: How do you avoid the shoddy look of loose or unaligned cabinet doors that often occurs over time? You buy certified cabinets. During two separate tests - focusing on the cabinet doors and hinges-the KCMA test their ability to withstand 65 pounds of weight and 25,000 swing cycles. KCMA-certified cabinetry continues to operate flawlessly with no signs of damage or looseness.
- Spill Tests: Because the finish of your cabinetry is one of its most visible features, the KCMA test it to make certain it's manufactured to withstand potentially abrasive substances. KCMA exposes cabinetry to such stain threats as vinegar, grape juice, coffee, alcohol, and even mustard for varying amounts of time. The result? Cabinets that earn the KCMA certification seal show no discoloration that can't easily be polished away.
- Heat Tests: After sweltering in a humid, 120-degree hotbox for 24 hours, how do KCMA-certified cabinets respond? Beautifully. With no discoloration or blistering, your certified cabinets prove they can handle the inevitable temperature hazards in your kitchen.
Midtown Cream Shaker
Product Overview
Ships in 4-6 weeks
Accident Protection Warranty For Your Entire Kitchen! Learn More!
The Midtown Cream Shaker cabinets are a perfect way to brighten your space. With a soft, cream finish, these cabinets have a classic, yet modern styling that will not go unnoticed. Dress up the cabinets with decorative moldings and panels to really make your kitchen stand out!
Please note that items from pre-assembled collections are not able to be returned, for more information, please see our FAQ page. We strongly encourage all customers to order a refundable sample door prior to purchasing.
Specifications
| Shipping Time: | Ships in 4-6 weeks |
| Matching Collections: |
             |
| Style: | Shaker |
| Face Frame: | 3/4" x 1-1/2" solid wood |
| Door Frame: | 3/4" Thick x 2-1/2" W solid birch |
| Door Center: | 3/8" thick MDF captured in frame with rubber spacers |
| Door Frame Width: | 2.5" |
| Center Panel Beveled Edge: | Yes |
| Sides: | 1/2" birch veneered plywood sides, dovetailed into face frame |
| Top & Bottom (Wall): | 1/2" thick birch veneered plywood |
| Bottom (Base): | 1/2" thick birch veneered plywood |
| Back Panel: | 1/2" thick birch veneered plywood |
| Shelves: | 3/4" birch veneered plywood with matching edge banding, nickel plated shelf clips |
| Base Cabinet Shelf Depth: | 18" |
| Drawer Front: | 5-pc recessed panel |
| Drawer Box: | 5/8" solid birch, dovetailed drawer box with 3/8" plywood bottom |
| Drawer Glides: | BLUM Zinc, undermount, full extension, soft close, 50 lbs capacity |
| Base Corner Supports: | 1-1/2" x 1/2" panel beam |
| Overlay: | Full |
| Hinges: | BLUM 6-way adjustable, concealed, soft-close, opens 110 |
| Cabinet Interior: | Natural finish |
| Center Stile: |
None unless noted in cabinet description |
| Assembly Method: | Ships pre-assembled, dovetailed, glued, stapled, screwed |
| Finish: | Sherwin Williams paint with a catalytic conversion top coat |
| Toe Kick: | 3/4" x 4-1/2" solid birch (toe kick area will be a natural finish, 8' toe kicks are required for base, oven, pantry and vanity cabinets) |
| Installation Rail: | 1/2" full back so a specific rail isn't needed |
| CARB Compliant: | Yes |
| Door Hinges: | Please use drop down options for each cabinet to change hinging from right to left. Doors can also be flipped to change hinging after deliver, if needed. |
| Side Panels Finished: | No (side will be unfinished plywood, for exposed sides, be sure to add the finished side option, when selected, the matching side will also be flush with the side of the cabinet). |
| Installation/Design Note: |
The cabinet depth measurement listed is the depth from the front of the face frame to the back of the cabinet, and does not include the cabinet door depth. Cabinet specs are subject to change without notice. *Cabinet measurements are typically converted from metric to inches and manufacturers will commonly round up to the nearest 1/4 inch. This can cause a measurement to be off by a fraction of an inch (less than 1/4") which is within normal industry standards* Schematic images and renderings are generic and may not represent exact construction details for each collection. The exact specifications for this collection can be found in the construction details listed above. |
Assembly
Wall Cabinets
Base Cabinets
Oven/Pantry Cabinets
Cabinet Accessories
Bathroom Vanities
Storage Accessories
-
View All
-
Sample Door
-
30" High Wall Cabinets
-
36" High Wall Cabinets
-
42" High Wall Cabinets
-
12" Deep Small Wall Cabinets
-
24" Deep Small Wall Cabinets
-
Corner and Blind Wall Cabinets
-
Microwave Wall Cabinets
-
Wall Cabinets With Drawers
-
Wall End Cabinets
-
Organizer Wall Cabinets
-
Appliance Garage Cabinet
-
Wine and Glass Racks
-
Hoods
-
Wall Cabinet Hanging Kits
Cabinet sides will have a natural finish, please use the View Options area to add finished sides
-
View All
-
Single Door Base Cabinets
-
Single Door Full Height Base Cabinets
-
Double Door Base Cabinets
-
Double Door Full Height Base Cabinets
-
Drawer Base Cabinets
-
Corner and Blind Base Cabinets
-
Sink Base Cabinets
-
Microwave Base Cabinet
-
Oven Base Cabinet
-
File Base Cabinet
-
Transition and Angle Base Cabinets
-
Spice Rack Cabinets
-
Base Cabinet Accessories
Cabinet sides and toe kick area will have a natural finish, please use the View Options area to add finished sides and 8' toe kicks can be added from the Cabinet Accessories section
-
View All
-
Oven Cabinets
-
Pantry Cabinets
Cabinet sides and toe kick area will have a natural finish, please use the View Options area to add finished sides and 8' toe kicks can be added from the Cabinet Accessories section
-
View All
-
Fillers
-
Moldings and Toe Kick
-
Skins, Panels and Decorative Doors
-
Wainscot Panels
-
Valances
-
Roll Out Trays
-
Floating Shelves
-
Posts, Corbels, and Columns
-
Lazy Susan Inserts
-
Spice Rack Pullout
-
Base Cabinet Accessories
-
Tilt Out Trays
-
Cutlery Dividers
-
Lift Up Hinge and Hinge Restrictors
-
Recommended Decorative Hardware
-
Touch Up
-
View All
-
Vanity Sink Base Cabinets
-
Single Drawer and Full Height Door Vanity Cabinets
-
Vanity Drawer Base Cabinets
-
Vanity or Desk Drawer
-
Vanity Desk Leg
Cabinet sides and toe kick area will have a natural finish, please use the View Options area to add finished sides and 8' toe kicks can be added from the Cabinet Accessories section
-
View All
-
Filler Pull-Out Organizers
-
Base Trash Cabinet Accessories
-
Sink Base Tilt Out Trays
-
Inside Drawer Accessories
-
Inside Door Accessories
-
Inside Cabinet Accessories
Login and Registration Form